Pin or use quilters tape to hold your pattern in place and cut two different pieces of fabric. Place the two pieces of fabric right sides together and sew using a 1/4" seam allowance. Make sure to leave one 3/4" end side open for turning. Turn fabric right side out by using a chopstick to gently push the closed end through. Flatten and press. Turn your open end in 1/4" and press. Now you need to sew two lines with a 5/8" opening down the middle of your fabric headband. Pick a side to sew on thinking about the color thread you use. This created channel is where you slide the metal headband into. You can do this by measuring and marking 2 lines centered 5/8" down the middle of your headband piece using an air erase pen.