Looking for a beginner sewing project? This is the one! This project can be completed in under an hour and is absolutely adorable. When all your friends ask “Where’d you get that skirt?” You can say, “I made it!”
For more tutorials and fun projects go to
http://the-dailyme.blogspot.com
| SHARE | Tweet |
|
  « 2 |
After measuring my waist, I cut a 2 inch wide elastic band the length I need (and added 1/2 inch) Then I sewed the two ends together to form a tube.
Next, I folded my two yards of fabric in half so that it was 72x22 and cut. Now I have two pieces that are 72x22 which is enough for two skirts! I flipped the material front to front and sewed up the side so that I now had a giant tube.
Then I ironed the top down across the whole 72 inches by about 1/2 an inch. I then sewed a simple stitch (using the longest stitch length I could) and pulled the back stitch so that the skirt gathered at the top. The picture below shows the gathered stitch. You will need to go slowly here as you pull because you don't want your thread to break. It's a tedious process but the rest of the skirt is fairly simple so its worth it.
Once the skirt was gathered enough that it was the same width as my elastic band I pinned the two together (elastic band behind the material) and sewed! Then I used my iron to do a double fold along the bottom of the skirt and sewed that together...and that was it!
Subscribe:
Comments
You must be logged in to post a comment.